how to connect projector to laptop windows 10

After the screen type, select the camera type, and you can go with the webcam. Then select the screen type you have installed for projection and opt for a simple surface. Choose both the projector for multi-display and then click on the forward button. Once you choose, you will find a new dialogue box to select the projector.

Next, click on the home menu in the Anyblend software and then select “Start a new camera-based setup for a blended desktop” option. Then press on the Apply screen which will open a pop-up stating that you have successfully applied the change. You may check our guide to find the best projector. However, if you have a Windows 7 laptop with a high-end GPU and 1080p native projector, then change the resolution to Full HD. You need to select the same resolution for both the display, and it would be best if you set it to 720p. Under the multi-display page, you will find the resolution setting, and you will see two separate screen option. So first connect the VGA or HDMI cable to the adapter and then use another cable to hook the laptop with the adapter.Īfter the laptop boots, open the ATI Eyefinity multi-display control panel located under the AMD Radeon toolbar. However, most of the computer comes with single VGA or HDMI cable so you will need Triplehead2Go adapter to connect both the monitor. To stay on the safe side, hook it’s power cable to the power strip so that it won’t automatically shut down due to battery drainage.Ĭonnect the projector with the laptop using VGA or HDMI cable.

Place the Windows 7 laptop near the two projectors and then switch it ON. Then align the projector slowly so that you can overlap the test-image and try to maintain an overlap of a minimum of 10% but not less. Use the remote of the projectors to project a test-screen and make sure the test screen should be of the same size.

How to connect projector to laptop windows 10